|
This is can be set up by using a simple Schedule 40 or 80 PVC
Pipe.
The Munchkin Boiler Series will also have a
venting length minus the fittings on the intake and the exhaust will run up to 85 feet for 2 inch
and 3 inch standard pipe sizes and up to 125 feet with 4″ size pipe. PVC can also be used here to
install. There are no special sizes or fancy materials used to run any pipe on this series of
boilers. The boiler has a low supply temperature as well as a quiet operation mode. These will also
help in the area of efficiency.
The boiler has a ¾ gas connection
on the right side of the unit. Making installation easy, there are no abnormal connection sizes.
The venting systems are easily located at the back of the boiler; all parts are readily accessible
for easy service and inspection.
The complete Heat Exchanger is made with a 316L Stainless Steel combustion
chamber. It is fully insulated and contained in a plastic enclosure. This design was created to
help remove any condensation from the back of the exchanger. The tubes in the heat exchanger are
put together in a header along with o-ring seals that are placed inside a stainless steel banding
material. This process also helps keep the heat in and the heating cost low. The heat exchanger
alone has a 12 year limited warranty on parts and labor.
The Munchkin Boiler Series also gas an easy to read digital controller
instrument. The controller comes with a spark or a hot surface igniter. Part of the job of the
control is to fix the firing rate of the boiler at the same time you are keeping the desired
temperature.
|