<< Previous    [1]  2    Next >>

Pex Plumbing

Pex plumbing is an installer’s dream. It is the supply pipe of the future by most accounts. Cross-linked polyethylene, or PEX, is easily cut and flexible enough to make gentle bends around corners. PEX plumbing is also strong and can handle hot as well as cold water in any application. To join compression fittings, no special tools or materials are required – only a pair of pliers or an adjustable wrench. For some permanent fittings, however, there is a special crimping tool required. Where approved by local codes PEX is an ideal material for replacing old galvanized pipe systems because it can be snaked through walls. And PEX offers a manifold fitting which allows the installer to use one water supply line from one source and add branching runs as required.

 

Because of the flexibility of Pex plumbing, the hole placement in new framing structure need only be precise enough to allow a smooth bend. In most case it is possible to run the pipe through the holes, and cut it in place rather than marking and sawing as with metallic piping.   In some applications when joining PEX materials to metallic, care must be taken to use the correct transition fittings.


What is Pex?

Depending on where you may live, Pex may sound old school to you or it may be a new term. Pex is more scientifically known as Cross Linked Polyethylene. It is basically a form or style of tubing, which is commonly used in Hydronic Heating System but not limited to domestic water piping and [...]

 


picture_of_pex_vs_copperSince the there is this super interest in pex plumbing lately we will compare pex plumbing with good old copper plumbing in several different areas.
Price of copper pipe  Vs price of pex pipe
The price of copper is way higher then the price of pex tubing as far as the initial rough goes for sure, [...]

How To Connect A Pex Fitting
picture_of_wirsbo_compression_ring

Pex Piping Or Pex Tubing connects by using insert fittings and crimp rings and they must be crimped using a special tool and in this lesson we will tell you how to make a pex connection.
Step One:
The first step is to get your roll of pex or stick of pex and make sure you [...]


Sharkbite Elbows
picture_of_sharkbite_elbows

Sharkbite is a great brand in the Pex industry.
They are durable and made from quality materials.
There are different types of styles of the Sharkbite elbow, rang.

Clean Pex Manifold Install By 3Kings Plumbing

 


Saving time is a key requirement for most people, and it has been shown that 50 feet of PEX piping with five fittings can be installed in about an hour. The main drawback with PEX materials at this stage in their development is price.  They are expensive – in some areas twice that of copper which has sold at a premium for several years now.  One other constraint has to do with what is allowed by local codes. Even though widely installed in warm climates such as the southern United States, there are many states that have yet to allow its use.


<< Previous    [1]  2    Next >>